unless defined?(Ruby310Compat) begin compat_candidates = [] begin compat_candidates << File.expand_path('000_Ruby310_Compat.rb', File.dirname(__FILE__)) rescue StandardError end begin cwd = Dir.pwd.to_s compat_candidates << File.expand_path('Data/Scripts/000_Ruby310_Compat.rb', cwd) unless cwd.empty? compat_candidates << File.expand_path('000_Ruby310_Compat.rb', cwd) unless cwd.empty? rescue StandardError end compat_candidates.compact.uniq.each do |compat_path| next unless File.file?(compat_path) load compat_path break if defined?(Ruby310Compat) end rescue StandardError end end #============================================================================== # # ▼ Yanfly Engine Ace - Debug Extension v1.01 # -- Last Updated: 2012.01.05 # -- Level: Easy, Normal # -- Requires: n/a # #============================================================================== #============================================================================== # ▼ Updates # =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= # 2015.09.01 - Delayed the generation of the windows until they are needed. # 2012.01.05 - Script no longer conflicts with conditional Key presses. # 2012.01.04 - Started Script and Finished. # #============================================================================== # ▼ Introduction # =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= # While the RPG Maker VX Ace debug menu gets the basics done, this script will # add on even more functionality. This script provides an extended debug menu, # common event shortcuts that can be ran from a few key presses, and even an # input console to manually insert code and run it. # #============================================================================== # ▼ Instructions # =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= # To install this script, open up your script editor and copy/paste this script # to an open slot below ▼ Materials/素材 but above ▼ Main. Remember to save. # # ----------------------------------------------------------------------------- # Debug Shortcuts - Only during $TEST and $BTEST mode # ----------------------------------------------------------------------------- # Alt + F5-F9 - Common Event Debug Shortcut # Ctrl + F5-F9 - Common Event Debug Shortcut # Shift + F5-F9 - Common Event Debug Shortcut # F9 on the map - Open Debug Menu. # # F10 anywhere - Opens up the Debug Entry Window. # Here, you may enter in a piece of code and the script itself will run it # using the current scene as its host. So long as the code doesn't contain # any syntax errors, it'll run right immediately. Idea by OriginalWij. # #============================================================================== # ▼ Compatibility # =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= # This script is made strictly for RPG Maker VX Ace. It is highly unlikely that # it will run with RPG Maker VX without adjusting. # #============================================================================== module YEA module DEBUG #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- # - Common Event Shortcut Settings - #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- # Here, you can define common event shortcuts to launch during test play # mode and pressing the right shortcut combination. If you do not wish to # use a particular shortcut key, set it to 0. #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- # Common event shortcuts when holding down ALT and pressing an F5-F9 key. ALT ={ # Only works during test play mode. :F5 => 0, :F6 => 0, :F7 => 0, :F8 => 0, :F9 => 0, } # Do not remove this. # Common event shortcuts when holding down CTRL and pressing an F5-F9 key. CTRL ={ # Only works during test play mode. :F5 => 0, :F6 => 0, :F7 => 0, :F8 => 0, :F9 => 0, } # Do not remove this. # Common event shortcuts when holding down SHIFT and pressing an F5-F9 key. SHIFT ={ # Only works during test play mode. :F5 => 0, :F6 => 0, :F7 => 0, :F8 => 0, :F9 => 0, } # Do not remove this. #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- # - Debug Menu Settings - #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- # The following adjusts debug menu data. There's no real need to edit # anything here unless you feel like it. Here's what the commands do: # :switches Adjust switches like default. # :variables Adjust variables like default. # :teleport Teleport to different maps. # :battle Enter the selected battle. # :events Call common events from menu. # :items Adjust item quantities. # :weapons Adjust weapon quantities. # :armours Adjust armour quantities. #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- # Command window layout for the debug menu. Determines order and which # commands will be shown in the command window. COMMANDS =[ [ :switches, "Switches"], [:variables, "Variables"], [ :teleport, "Teleport"], [ :battle, "Battle"], [ :events, "Events"], [ :items, "Items"], [ :weapons, "Weapons"], [ :armours, "Armours"], ] # Do not remove this. end # DEBUG end # YEA module Input #-------------------------------------------------------------------------- # constants - Created by OriginalWij and Yanfly #-------------------------------------------------------------------------- DEFAULT = [:DOWN, :LEFT, :RIGHT, :UP, :A, :B, :C, :X, :Y, :Z, :L, :R, :SHIFT, :CTRL, :ALT, :F5, :F6, :F7, :F8, :F9] LETTERS = {} LETTERS['A'] = 65; LETTERS['B'] = 66; LETTERS['C'] = 67; LETTERS['D'] = 68 LETTERS['E'] = 69; LETTERS['F'] = 70; LETTERS['G'] = 71; LETTERS['H'] = 72 LETTERS['I'] = 73; LETTERS['J'] = 74; LETTERS['K'] = 75; LETTERS['L'] = 76 LETTERS['M'] = 77; LETTERS['N'] = 78; LETTERS['O'] = 79; LETTERS['P'] = 80 LETTERS['Q'] = 81; LETTERS['R'] = 82; LETTERS['S'] = 83; LETTERS['T'] = 84 LETTERS['U'] = 85; LETTERS['V'] = 86; LETTERS['W'] = 87; LETTERS['X'] = 88 LETTERS['Y'] = 89; LETTERS['Z'] = 90 NUMBERS = [48, 49, 50, 51, 52, 53, 54, 55, 56, 57] NUMPAD = [96, 97, 98, 99, 100, 101, 102, 103, 104, 105] BACK = 0x08; ENTER = 0x0d; SPACE = 32; SCOLON = 186; ESC = 157 QUOTE = 222; EQUALS = 187; COMMA = 188; USCORE = 189; PERIOD = 190 SLASH = 191; LBRACE = 219; RBRACE = 221; BSLASH = 220; TILDE = 192 F10 = 121; F11 = 122; F12 = 123; CAPS = 20; NMUL = 106; NPLUS = 107 NSEP = 108; NMINUS = 109; NDECI = 110; NDIV = 111; Extras = [USCORE, EQUALS, LBRACE, RBRACE, BSLASH, SCOLON, QUOTE, COMMA, PERIOD, SLASH, NMUL, NPLUS, NSEP, NMINUS, NDECI, NDIV] #-------------------------------------------------------------------------- # initial module settings - Created by OriginalWij and Yanfly #-------------------------------------------------------------------------- GetKeyState = Ruby310Compat.native_api("user32", "GetAsyncKeyState", "i", "i") GetCapState = Ruby310Compat.native_api("user32", "GetKeyState", "i", "i") KeyRepeatCounter = {} module_function #-------------------------------------------------------------------------- # new method: default_key? - Created by Yanfly #-------------------------------------------------------------------------- def self.default_key?(key) return true if key.is_a?(Integer) && key < 30 return DEFAULT.include?(key) end #-------------------------------------------------------------------------- # new method: adjust_key - Created by OriginalWij #-------------------------------------------------------------------------- def self.adjust_key(key) key -= 130 if key.between?(130, 158) return key end #-------------------------------------------------------------------------- # new method: key_pressed? - Created by OriginalWij #-------------------------------------------------------------------------- def self.key_pressed?(key) if (GetKeyState.call(key).abs & 0x8000 == 0x8000) KeyRepeatCounter[key] = 0 return true end return false end #-------------------------------------------------------------------------- # new method: typing? - Created by Yanfly #-------------------------------------------------------------------------- def self.typing? return true if repeat?(SPACE) for i in 'A'..'Z' return true if repeat?(LETTERS[i]) end for i in 0...NUMBERS.size return true if repeat?(NUMBERS[i]) return true if repeat?(NUMPAD[i]) end for key in Extras return true if repeat?(key) end return false end #-------------------------------------------------------------------------- # new method: key_type - Created by Yanfly #-------------------------------------------------------------------------- def self.key_type return " " if repeat?(SPACE) for i in 'A'..'Z' next unless repeat?(LETTERS[i]) return upcase? ? i.upcase : i.downcase end for i in 0...NUMBERS.size return i.to_s if repeat?(NUMPAD[i]) if !press?(KEYMAP[:SHIFT]) return i.to_s if repeat?(NUMBERS[i]) elsif repeat?(NUMBERS[i]) case i when 1; return "!" when 2; return "@" when 3; return "#" when 4; return "$" when 5; return "%" when 6; return "^" when 7; return "&" when 8; return "*" when 9; return "(" when 0; return ")" end end end for key in Extras next unless repeat?(key) case key when USCORE; return press?(KEYMAP[:SHIFT]) ? "_" : "-" when EQUALS; return press?(KEYMAP[:SHIFT]) ? "+" : "=" when LBRACE; return press?(KEYMAP[:SHIFT]) ? "{" : "[" when RBRACE; return press?(KEYMAP[:SHIFT]) ? "}" : "]" when BSLASH; return press?(KEYMAP[:SHIFT]) ? "|" : "\\" when SCOLON; return press?(KEYMAP[:SHIFT]) ? ":" : ";" when QUOTE; return press?(KEYMAP[:SHIFT]) ? '"' : "'" when COMMA; return press?(KEYMAP[:SHIFT]) ? "<" : "," when PERIOD; return press?(KEYMAP[:SHIFT]) ? ">" : "." when SLASH; return press?(KEYMAP[:SHIFT]) ? "?" : "/" when NMUL; return "*" when NPLUS; return "+" when NSEP; return "," when NMINUS; return "-" when NDECI; return "." when NDIV; return "/" end end return "" end #-------------------------------------------------------------------------- # new method: upcase? - Created by Yanfly #-------------------------------------------------------------------------- def self.upcase? return !press?(KEYMAP[:SHIFT]) if GetCapState.call(CAPS) == 1 return true if press?(KEYMAP[:SHIFT]) return false end end # Input #============================================================================== # ■ Clipboard #============================================================================== module Clipboard # Version: 1.2.3 # Last Update: March 22nd, 2014 # Author: Zalerinian (~ZF) # Clipboard functions OpenClipboard = Ruby310Compat.native_api('user32', 'OpenClipboard', ['I'], 'I'); CloseClipboard = Ruby310Compat.native_api('user32', 'CloseClipboard', [], 'I'); EmptyClipboard = Ruby310Compat.native_api('user32', 'EmptyClipboard', [], 'I'); GetClipboardData = Ruby310Compat.native_api('user32', 'GetClipboardData', ['I'], 'I'); SetClipboardData = Ruby310Compat.native_api('user32', 'SetClipboardData', ['I', 'I'], 'I'); Alloc = Ruby310Compat.native_api('kernel32', 'GlobalAlloc', ['I','I'], 'I'); Lock = Ruby310Compat.native_api('kernel32', 'GlobalLock', ['I'], 'P'); Unlock = Ruby310Compat.native_api('kernel32', 'GlobalUnlock', ['I'], 'I'); Len = Ruby310Compat.native_api('kernel32', 'lstrlenA', ['P'], 'I'); Copy = Ruby310Compat.native_api('kernel32', 'lstrcpyA', ['I', 'P'], 'P'); LockI = Ruby310Compat.native_api('kernel32', 'GlobalLock', ['I'], 'I'); #-------------------------------------------------------------------------- # Clipboard: GetText NEW METHOD # * This method will get the text currently on the users clipboard and # * return it. #-------------------------------------------------------------------------- def self.GetText result = "" if OpenClipboard.Call(0) != 0 if (h = GetClipboardData.Call(1)) != 0 if (p = Lock.Call(h)) != 0 result = p; Unlock.Call(h); end end CloseClipboard.Call; end return result; end #-------------------------------------------------------------------------- # Clipboard: SetText NEW METHOD # * This will allow you to set the text of the clipboard so that the user # * may paste information elsewhere. #-------------------------------------------------------------------------- def self.SetText(text) if (text == nil) || (text == "") return end if OpenClipboard.Call(0) != 0 EmptyClipboard.Call(); len = Len.Call(text); hmem = Alloc.Call(0x2000, len+1); pmem = LockI.Call(hmem); Copy.Call(pmem, text); SetClipboardData.Call(1, hmem); Unlock.Call(hmem); CloseClipboard.Call; end end end # Clipboard #============================================================================== # ■ SceneManager #============================================================================== module SceneManager #-------------------------------------------------------------------------- # new method: self.force_recall #-------------------------------------------------------------------------- def self.force_recall(scene_class) @scene = scene_class end end # SceneManager #============================================================================== # ■ Sprite_DebugMap #============================================================================== #============================================================================== # ■ Scene_Base #============================================================================== class Scene_Base #include EvLib # ## bring in the singleton methods as instance methods #EvLib.singleton_methods.each do |m| # define_method(m) do |*args, &block| # EvLib.send(m, *args, &block) # end #end #attr_accessor :code_rec #attr_accessor :code_rec_cur #-------------------------------------------------------------------------- # alias method: update_basic #-------------------------------------------------------------------------- #-------------------------------------------------------------------------- # new method: trigger_debug_window_entry #-------------------------------------------------------------------------- def trigger_debug_window_entry LonaCoreSecurity.blocked_console! if defined?(LonaCoreSecurity) && defined?(Input) && defined?(Input::F10) && Input.trigger?(Input::F10) false rescue false end #-------------------------------------------------------------------------- # new method: process_debug_window_entry #-------------------------------------------------------------------------- #def process_debug_window_entry # #========================================================== # # 1. 讀取 ConsoleHistory.txt(若無→建立) # #========================================================== # history_path = File.join(Dir.pwd, "UserData/ConsoleHistory.txt") # console_history = [] # # # # 若檔案不存在 → 建立空檔案 # unless File.exist?(history_path) # File.open(history_path, "w:utf-8") {} # 空檔案 # end # # begin # # 讀取、strip、排除 ENTER 空白行 # lines = File.readlines(history_path, chomp: true) # console_history = lines.map { |s| s.strip }.reject(&:empty?) # rescue => err # prp "History Load Error: #{err.message}", 1 # console_history = [] # end # #========================================================== # # 2. 根據 $TEST 與 $data_ConsoleCodeREC 建立 Console 記錄 # #========================================================== # if $TEST && !$data_ConsoleCodeREC # # TEST 模式 → 讀入歷史 + 放三個常用指令於末端 # $data_ConsoleCodeREC = console_history.clone # # debug_cmds = [ # 'load_script("asd.rb")', # 'EvLib.GMI.new_game_GetDebugSkills', # 'EvLib.UpLang' # ] # # # 確保歷史中若有舊版本 → 移除 # debug_cmds.each { |cmd| $data_ConsoleCodeREC.delete(cmd) } # # # 加到最新位置 # debug_cmds.each { |cmd| $data_ConsoleCodeREC << cmd } # # elsif !$data_ConsoleCodeREC # # 非 TEST → 只吃歷史紀錄(可能是空) # $data_ConsoleCodeREC = console_history.clone # end # # #========================================================== # # 後續為你原本的初始化流程 # #========================================================== # $data_ConsoleCodeREC_cur = 0 if $data_ConsoleCodeREC_cur # Graphics.freeze # viewport = Viewport.new(0, 0, Graphics.width, Graphics.height) # viewport.z = 8000 # @debug_entry_window = Window_DebugEntry.new($data_ConsoleCodeREC) # @debug_entry_window.viewport = viewport # @debug_entry_window_PRP_REC = Window_Debug_PRP_REC.new # @debug_entry_window_PRP_REC.viewport = viewport # Graphics.transition(4) # update_debug_window_entry # Graphics.freeze # @debug_entry_window.dispose # @debug_entry_window = nil # @debug_entry_window_PRP_REC.dispose # @debug_entry_window_PRP_REC = nil # viewport.dispose # Graphics.transition(4) #end def process_debug_window_entry return false return LonaCoreSecurity.blocked_console! if defined?(LonaCoreSecurity) && !LonaCoreSecurity.console_allowed? # ====================== 關鍵修正:中文路徑防炸 ====================== base_dir = Dir.pwd.dup.force_encoding("UTF-8") user_data_dir = File.join(base_dir, "UserData").force_encoding("UTF-8") history_path = File.join(user_data_dir, "ConsoleHistory.txt").force_encoding("UTF-8") # 強制建立 UserData 資料夾(不管有沒有中文都不會炸) Dir.mkdir(user_data_dir) rescue nil console_history = [] # 讀取歷史紀錄 begin if File.exist?(history_path) File.open(history_path, "r:UTF-8") do |f| lines = f.readlines.map { |s| s.chomp } console_history = lines.map { |s| s.strip }.reject(&:empty?) end else # 第一次建立空檔案 File.open(history_path, "w:UTF-8") { |f| } end rescue => err prp "History Load Error: #{err.message}", 1 console_history = [] end # 以下是你原本的 $data_ConsoleCodeREC 邏輯,全部保留不變 if $TEST && !$data_ConsoleCodeREC $data_ConsoleCodeREC = console_history.clone debug_cmds = [ 'load_script("asd.rb")', 'EvLib.GMI.new_game_GetDebugSkills', 'EvLib.UpLang' ] debug_cmds.each { |cmd| $data_ConsoleCodeREC.delete(cmd) } debug_cmds.each { |cmd| $data_ConsoleCodeREC << cmd } elsif !$data_ConsoleCodeREC $data_ConsoleCodeREC = console_history.clone end # 後面原本的初始化流程全部保留 $data_ConsoleCodeREC_cur = 0 if $data_ConsoleCodeREC_cur.nil? Graphics.freeze viewport = Viewport.new(0, 0, Graphics.width, Graphics.height) viewport.z = 8000 @debug_entry_window = Window_DebugEntry.new($data_ConsoleCodeREC) @debug_entry_window.viewport = viewport @debug_entry_window_PRP_REC = Window_Debug_PRP_REC.new @debug_entry_window_PRP_REC.viewport = viewport Graphics.transition(4) update_debug_window_entry Graphics.freeze @debug_entry_window.dispose @debug_entry_window = nil @debug_entry_window_PRP_REC.dispose @debug_entry_window_PRP_REC = nil viewport.dispose Graphics.transition(4) end #-------------------------------------------------------------------------- # new method: update_debug_window_entry #-------------------------------------------------------------------------- def update_debug_window_entry return false execute_command = nil loop do Graphics.update Input.update @debug_entry_window.update @debug_entry_window_PRP_REC.update if Input.trigger?(Input::ESC) SndLib.sys_cancel if @debug_entry_window.text.size > 0 @debug_entry_window.text = "" else break end elsif Input.press?(:SHIFT) && Input.trigger?(Input::F10) break execute_command = "resetRGSS" if !defined?(LonaCoreSecurity) || LonaCoreSecurity.console_allowed? elsif Input.trigger?(Input::F10) SndLib.sys_cancel break elsif Input.trigger?(Input::ENTER) code = @debug_entry_window.text begin $data_ConsoleCodeREC = $data_ConsoleCodeREC.last(System_Settings::Console::HISTORY_CAP-1) if $data_ConsoleCodeREC.length >= System_Settings::Console::HISTORY_CAP $data_ConsoleCodeREC << code @debug_entry_window.code_rec = $data_ConsoleCodeREC prp "=> #{code}",2 return LonaCoreSecurity.blocked_console! if defined?(LonaCoreSecurity) && !LonaCoreSecurity.console_allowed? eval(code) SndLib.sys_ok @debug_entry_window.clearn_characters @debug_entry_window.update_record_array($data_ConsoleCodeREC,code) @debug_entry_window.refresh @debug_entry_window_PRP_REC.refresh save_console_history #end rescue Exception => ex begin evlibCode = "EvLib."+code $data_ConsoleCodeREC = $data_ConsoleCodeREC.last(System_Settings::Console::HISTORY_CAP-1) if $data_ConsoleCodeREC.length >= System_Settings::Console::HISTORY_CAP $data_ConsoleCodeREC << code @debug_entry_window.code_rec = $data_ConsoleCodeREC #prp "=> #{evlibCode}",2 return LonaCoreSecurity.blocked_console! if defined?(LonaCoreSecurity) && !LonaCoreSecurity.console_allowed? eval(evlibCode) SndLib.sys_ok code = evlibCode @debug_entry_window.clearn_characters @debug_entry_window.update_record_array($data_ConsoleCodeREC,code) @debug_entry_window.refresh @debug_entry_window_PRP_REC.refresh save_console_history #end rescue Exception => ex prp "ERROR: #{ex.message}",1 #print error message @debug_entry_window_PRP_REC.refresh SndLib.sys_buzzer end end end end if execute_command if defined?(LonaCoreSecurity) && !LonaCoreSecurity.console_allowed? LonaCoreSecurity.blocked_console! else eval(execute_command) end end end #def save_console_history # begin # # 遊戲根目錄 # path = File.join(Dir.pwd, "UserData/ConsoleHistory.txt") # # # 最多 10 行 # lines = $data_ConsoleCodeREC.last(System_Settings::Console::HISTORY_CAP) # # # 寫入文字檔 # File.open(path, "w:utf-8") do |file| # lines.each { |l| file.puts(l) } # end # # rescue Exception => ex # prp "SAVE HISTORY ERROR: #{ex.message}", 1 # end #end #-------------------------------------------------------------------------- # 修正後的 save_console_history #-------------------------------------------------------------------------- def save_console_history begin base_dir = Dir.pwd.dup.force_encoding("UTF-8") user_data_dir = File.join(base_dir, "UserData").force_encoding("UTF-8") history_path = File.join(user_data_dir, "ConsoleHistory.txt").force_encoding("UTF-8") Dir.mkdir(user_data_dir) rescue nil lines = $data_ConsoleCodeREC.last(System_Settings::Console::HISTORY_CAP) || [] File.open(history_path, "w:UTF-8") do |file| lines.each { |l| file.puts(l) } end rescue Exception => ex prp "SAVE HISTORY ERROR: #{ex.message}", 1 end end def resetRGSS begin defined?(LonaCoreSecurity) ? LonaCoreSecurity.restart_game : spawn("Game.exe") rescue => e msgbox $game_text["umm:manager:top_menu/restart_failed"] p e.message + "\n" + e.backtrace.join("\n") end exit 0 end end # Scene_Base class Window_Debug_PRP_REC < Window_Base # Desired default lines for 640x360 def initialize # Fullscreen with standard padding compensation dx = -standard_padding @dy = -standard_padding dw = Graphics.width + standard_padding * 2 dh = Graphics.height super(dx, @dy, dw, dh) # Font settings contents.font.name = System_Settings::MESSAGE_WINDOW_FONT_NAME contents.font.bold = false contents.font.italic = false contents.font.shadow = false contents.font.outline = true contents.font.size = System_Settings::FONT_SIZE::CONSOLE_OUTPUT contents.font.color = Color.new(255, 255, 255) # Compute line height based on contents height and desired lines # Ensures all lines fit regardless of resolution @line_height = contents.height.to_f / System_Settings::Console::DESIRED_LINES @max_lines = System_Settings::Console::DESIRED_LINES # Initial window position self.z -= 1 self.y = -dh self.opacity = 255 refresh end # Refresh the console content def refresh contents.clear # Draw version info at bottom contents.font.color = Color.new(255, 255, 255) contents.draw_text( Rect.new(4, contents.height - @line_height * 2, contents.width, @line_height), " " + DataManager.export_full_ver_info, 2 ) # Draw console lines $PRP_REC.each_with_index do |(rec, color), i| break if i >= @max_lines # Set color based on value contents.font.color = case color when 1 then Color.new(255, 63, 0) when 2 then Color.new(42, 255, 0) when 3 then Color.new(66, 101, 255) when 4 then Color.new(0, 255, 255) when 5 then Color.new(255, 0, 255) when 6 then Color.new(255, 255, 0) else Color.new(255, 255, 255) end # Draw the line using computed line height contents.draw_text( Rect.new(4, i * @line_height, contents.width, @line_height), " "+rec.to_s, 0 ) end end # Simple easing slide-in effect def update super return if self.y >= -standard_padding self.y += Graphics.height / 4 self.y = -standard_padding if self.y >= -standard_padding end end class Window_DebugEntry < Window_Base attr_accessor :text attr_accessor :code_rec def initialize(code_rec) dx = -standard_padding dy = Graphics.height - fitting_height(1) + standard_padding dw = Graphics.width + standard_padding * 2 dh = fitting_height(1) super(dx, dy, dw, dh) contents.font.name = System_Settings::MESSAGE_WINDOW_FONT_NAME contents.font.bold = false contents.font.italic = false contents.font.shadow = false contents.font.outline = false contents.font.size = System_Settings::FONT_SIZE::CONSOLE_INPUT contents.font.color = Color.new(255, 255, 255) self.opacity = 0 @text = "" update_record_array(code_rec,current_code=nil) @text_pos = 0 @rect = Rect.new(4, 0, 8192, 24) refresh end def refresh contents.clear cw = contents.width contents.fill_rect(0, 0, cw, line_height, Color.new(192, 192, 192)) contents.fill_rect(1, 1, contents.width-2, line_height-2, Color.new(0, 0, 0)) if @blink tmpTEXT = @text.clone contents.draw_text(@rect, tmpTEXT.insert(@text_pos, "|"), 0) else tmpTEXT = @text.clone contents.draw_text(@rect, tmpTEXT.insert(@text_pos, " "), 0) end end def update #p "======================================" #p $data_ConsoleCodeREC[@current_code_rec].nil? #p "current-1#{$data_ConsoleCodeREC[@current_code_rec-1]} #{@current_code_rec-1}" #p "current #{$data_ConsoleCodeREC[@current_code_rec]} #{@current_code_rec}" #p "current+1#{$data_ConsoleCodeREC[@current_code_rec+1]} #{@current_code_rec+1}" super @blink = !@blink if (Graphics.frame_count % 30 == 0) maximum = 256 # user clipboard access: if Input.repeat?(:LETTER_V) && Input.press?(:CTRL) && @text.size <= maximum clipboard_text = Clipboard.GetText if @text[@text_pos] == 'v' char_arr = @text.chars char_arr.delete_at(@text_pos) @text = char_arr.join end if @text.size + clipboard_text.size <= maximum @text.insert(@text_pos, clipboard_text) @text_pos += clipboard_text.size end # elsif Input.repeat?(:DOWN) && $data_ConsoleCodeREC.length > 0 return if $data_ConsoleCodeREC[@current_code_rec+1].nil? @current_code_rec += 1 @current_code_rec = $data_ConsoleCodeREC.length if @current_code_rec > $data_ConsoleCodeREC.length-1 @text = "#{$data_ConsoleCodeREC[@current_code_rec+1]}" @text_pos = @text.size # elsif Input.repeat?(:UP) && $data_ConsoleCodeREC.length > 0 @text = "#{$data_ConsoleCodeREC[@current_code_rec]}" @text_pos = @text.size @current_code_rec -= 1 @current_code_rec = 0 if @current_code_rec < 0 elsif Input.repeat?(:RIGHT) && @text.size > 0 if Input.press?(:CTRL) # Move cursor to next boundary (word, symbol, or capitalization change) pos = @text_pos while pos < @text.size curr = @text[pos] next_char = @text[pos + 1] if pos + 1 < @text.size # Stop if next is nil (end) break if next_char.nil? # Stop if next is symbol and current is word char break if curr =~ /\w/ && next_char !~ /\w/ # Stop if current is symbol and next is word char break if curr !~ /\w/ && next_char =~ /\w/ # Stop at capitalization boundary break if curr =~ /[a-z]/ && next_char =~ /[A-Z]/ pos += 1 end @text_pos = pos + 1 else @text_pos += 1 end @text_pos = @text.size if @text_pos > @text.size SndLib.sys_buzzer if @text_pos == @text.size elsif Input.repeat?(:LEFT) && @text.size > 0 if Input.press?(:CTRL) # Move cursor to previous boundary pos = @text_pos while pos > 0 curr = @text[pos - 1] prev_char = @text[pos - 2] if pos - 2 >= 0 # Stop if prev is nil (start) break if prev_char.nil? # Stop if prev is symbol and current is word char break if prev_char !~ /\w/ && curr =~ /\w/ # Stop if prev is word char and current is symbol break if prev_char =~ /\w/ && curr !~ /\w/ # Stop at capitalization boundary (going left) break if prev_char =~ /[a-z]/ && curr =~ /[A-Z]/ pos -= 1 end @text_pos = pos - 1 else @text_pos -= 1 end @text_pos = 0 if @text_pos < 0 SndLib.sys_buzzer if @text_pos == 0 # --- HOME KEY --- elsif Input.repeat?(:HOME) @text_pos = 0 # --- END KEY --- elsif Input.repeat?(:END) @text_pos = @text.size elsif Input.repeat?(:DELETE) if Input.press?(:CTRL) # Ctrl+Delete: delete until next boundary (symbol, capital, or end of word) return if @text.empty? || @text_pos >= @text.size pos = @text_pos while pos < @text.size curr = @text[pos] next_char = @text[pos + 1] if pos + 1 < @text.size break if next_char.nil? break if curr =~ /\w/ && next_char !~ /\w/ # end of word break if curr !~ /\w/ && next_char =~ /\w/ # symbol to word break if curr =~ /[a-z]/ && next_char =~ /[A-Z]/ # lowercase to uppercase pos += 1 end # Remove text from current position to boundary @text.slice!(@text_pos..pos) else # normal delete 1 char @text[@text_pos] = "" if @text_pos < @text.size end elsif Input.typing? && @text.size <= maximum #@text += Input.key_type @text.insert(@text_pos, Input.key_type) @text_pos +=1 elsif Input.repeat?(Input::BACK) && @text.size > 0 Input.press?(:CTRL) ? howMany = 7 : howMany =1 howMany.times{ return if @text_pos == 0 @text[@text_pos - 1] = "" @text_pos -=1 } end refresh end def clearn_characters @text_pos = 0 @text = "" end def update_record_array(data,importCode=nil) $data_ConsoleCodeREC = data $data_ConsoleCodeREC.shift if $data_ConsoleCodeREC.length >= System_Settings::CONSOLE_MAX_RECORD #remove first array $data_ConsoleCodeREC = $data_ConsoleCodeREC.uniq #remove same command @current_code_rec = [0,$data_ConsoleCodeREC.length-1].max if importCode && $data_ConsoleCodeREC.include?(importCode) #if same command. move this input to array last index $data_ConsoleCodeREC.delete(importCode) $data_ConsoleCodeREC << importCode end end end # Window_DebugEntry